Iron and Bore Stain Remover
Spot test prior to use. Avoid using during hot or windy conditions and ensure surface is relatively cool and dry.
For best results, apply using using a spray bottle - do not dilute Ex-Stain solution. Apply until surface is fully saturated.
Typically allow 5-10 minutes for staining to disappear. Rinse surfaces thoroughly with water. Ensure product is not left to dry. Stubborn or old stains may require respraying.
Ensure to only use Ex-Stain as directed. For further details on application please refer to product label. For further safety instructions refer to the ‘safety directions’ link.
Aim to minimise over-spray onto plant foliage and other surfaces that have not been spot tested. Wash over-spray off during the rinsing phase.
Typically allow 200-300ml per sq.m. (4-6 tsp per sq.ft.). Note stubborn and old stains may require respraying.
Keep out of reach of children. Avoid contact with skin and eyes. Wear suitable protective clothing, gloves and eye/face protection.
further details regarding First aid and safety directions
